Modified base and MFJ-1979 whip |
Previously, whenever activating from the car, I either used no radials at all (10-20m) or connected one radial to the FT-891's rear panel ground lug (when on 30/40m).
But ideally, radials should be at the base of the antenna.
The "mod" simply involved drilling a hole in the plastic base of the antenna. I did this from the bottom of the mount, up through the metal plate to which the coax shield is internally connected.
A 6mm bolt then extends through the hole, allowing me to secure a spade lug to which radials can be attached, along with a Wolf River coil (40m).
Two of them, each a 1/4-wave long on 40m, are now part of the mobile set-up.
Spots into Europe on 40m several hours before my sunset seem to suggest it works well enough, as do the faster autotune times of the tuner.
Of course, the other bands benefit as well from the more substantial RF ground than my small car chassis offers.
Hurricane Idalia passed by from about 4:30-6 this morning. By 9am, patches of blue sky were already showing and I decided to activate a nearby Wildlife Management Area.
Surprisingly, there was no storm-related QRN and the bands were in excellent condition with EU easily worked on both 10 and 12 meters.
The FT-891 is becoming my favorite rig for this type of activity.
At 100 watts, it uses 6AH per hour from
a LiFePO4 battery. Therefore, a 2-hour battery (12AH) provides me with all the time I want for an activation and a log-full of contacts from a wide geographic area.The autotuner and memory keyer complete the package without it becoming too big or heavy to be portable, whether in the car or on the motorcycle.
100 watts is 8dB better than my KX3's 15-watt output.
For context, think of the work (and expense!) hams go to to improve their antennas by only half that amount.
Barring unforeseen circumstances, I hope to be in Maine for a few days, beginning 12 Sept, then north from there, to cooler, less Florida-y climes:
VE1, VY2 and VE9/AE5X, hopefully.
This morning's 1-1/2 hour activation results:
.
.
.
.
.
Good morning John, nice to read that you may be headed up this way for vacation. I am sure you will enjoy the Maritimes.
ReplyDelete73
Mike
VE9KK
Thanks Mike - I've wanted to see that area for many years now. Looking forward to it!
Delete73,
John
Hi John
DeleteA "must do" POTA visit on your trip would be in West Quoddy Head State Park in Lubec, ME, my QTH. This park is the easternmost point in the easternmost grid (FN64) and is, of course the easternmost point in the lower 48 states. Set up on a picnic table near the big lighthouse. Lots of salt water to enhance your signal. It's on your way to New Brunswick and beyond in Canada. Between Lubec and the border crossing in Calais, ME is another very rare spot, Saint Croix Island International Historic Site. Have a great trip.
73
Steve Silverman KB3SII. ... .. ..
Ham radio, hiking and photography - it looks amazing, Steve and we'll definitely try to stop there! Thanks for the info.
Delete73,
John
If the magnetic base can be made to electrically couple to the metal it holds onto, that will serve as a ground screen, which is superior to ground radials.
ReplyDeleteMagnetic mounts couple to the car via capacitive (lossy) coupling. Also, cars are not a significant portion of a wavelength long (or even a 1/4-wave) on 40 meters. In the situation described
Deleteabove, two elevated radials are superior to a capacitively attached magnetic antenna base.
Last but not least - it's not either/or...the original RF ground (the car) is still in the picture but is enhanced greatly by the addition of a proper RF ground.
73,
John
I use a different approach, a base antenna mount that takes an NMO antenna. It comes with radials for 144/440, but anything could be clipped on.
ReplyDeletehttps://observer.wunderwood.org/2018/07/08/using-a-mobile-antenna-as-a-temporary-base-antenna/